How to clean a burned iron? 7 tricks to make it new

Faced with the disaster that causes the iron to overheat and burn the clothes or ironing board, or leave it inadvertently plugged in and come back only when it has started to smell burnt, no stress too much.

Although what was burned can no longer be replaced, care must be taken that the residues left on the iron do not spoil another new garment. That's what these effective tricks on how to clean the iron are for.

How to clean a burned iron? 7 useful tips

It is definitely not a good idea to leave the iron uncleaned after it has burned, as fabric residue will stick. It is also common for traces of paint from the pattern of the garments to remain there, which is worse because the stains adhere more and then it is more difficult to remove them.

Fortunately, it's easy to know how to clean a burned iron and no more sophisticated things are required than what is commonly had at home. So all is not lost, you just have to get down to work.

• Recommended article: "How to clean the silver? 8 effective and simple tricks "

1. Toothpaste

Toothpaste can be used to clean the clothes iron. Because the toothpaste It is somewhat grainy, it works very well to "carve" smoothly. In addition, toothpaste compounds are used precisely to clean. For this reason, one way to clean the iron is by using a commonly used toothpaste that you have at home, no matter what brand it is.

The first thing to do is apply toothpaste on the cold iron, this must be exactly on the stains caused by the burn. With the help of a clean and dry cloth, you have to rub a little over the clothing residues and burnt stains. You have to remove as much as possible. To finish removing what remains, you have to turn on the iron and let it release the steam.

2. Vinegar

Vinegar has many and diverse uses, one of them is to clean the iron. This trick is effective when stains are more difficult to remove. The first thing to do is remove the fabric residue from the iron, if there is any, to avoid accidents and burns, the iron must be allowed to cool completely before handling to clean it and free it from stains.

The second step is to heat white vinegar. When it is hot you have to dip a clean cloth and wipe it over the base of the burned iron. This should be enough to dissolve the stains. If they still persist, you can add three tablespoons of salt or vinegar to the hot vinegar and try again. That will surely be enough to clean the iron. After this you just have to dry the surface of the iron very well.

3. Fire

Heating a little by bringing fire to the base of the iron is another effective trick to clean it.. You can soften the textile by burning the remains that were left on the base just by heating it a little. Therefore, for this trick, the ideal is to use a candle as it also allows better directing the heat and bringing only close enough without causing even more stains or burns. Also, a damp cloth is required to finish the job.

For this you only need to light a candle and light the iron at the lowest level. The candle fire must be carefully passed through where the remains of clothing have been left, but also the stains. If there are also stains caused by the printing or the colors of the clothes, you also have to pass the candle there. Then you have to wipe with the damp cloth to remove all the wax that will have melted and detached from the base of the iron.

4. Dishwasher soap

Dish soap (or dishwashing soap, in Mexico) is a very obvious trick but it rarely occurs to us to use it. Once the disaster of having burned something with the iron and seeing that it has been stained passes, the first thing that comes to mind is how to clean the iron. We think of sophisticated solutions believing that we are facing a big problem, but in reality there are to go back to basics: dish soap works great, especially if the stains are light.

Sometimes the iron does not stay that long on the clothes and although if there is a stain, it is not so big. In these cases it is enough to apply a little dish soap on a sponge and rub very lightly at the base of the iron. That if, it must be cold and disconnected. If there are traces of wax or burned clothing in the crevices, a cotton swab or the end of a cloth soaked in dish soap can be solved.

5. Salt

A trick that does not fail to clean the burned iron is with salt. Preferably, the salt should be granulated salt, but if you only have common-use salt on hand, it will work as well. You have to spread the salt on a dry cloth. They should be two to three teaspoons. The iron is turned on and when it is hot it is passed over the cloth with the salt, rubbing gently back and forth.

This trick can damage the surface of the iron a bit, as it is actually somewhat abrasive, so it is recommended to do it alone If the stains seem very difficult to remove and pressing only the necessary amount on the base of the iron so as not to scratch the surface too much. surface. Once it is verified that the residues are disappearing, the iron must be turned off and once it is cold, clean with a clean, damp cloth.

6. Metal polisher

A very effective way to clean the iron is with a metal polish. The metal polisher that is used to clean gold or silver jewelry, can also be used to Remove stains from the surface of the iron after it is burned by the cloth or board iron. This trick works as long as the iron is uncoated. If you are not totally sure about this, you can do a test on a very small area.

Using the metal polish to clean the iron is very simple. All you have to do is apply a little product on a special clean and dry cloth to polish and rub the surface of the iron with force. In this case, the iron must be turned off and totally cold. To make it work better, you need to apply a little force when polishing. Little by little the stains will disappear and regain their shine.

7. Clothes detergent

With laundry detergent you can clean an iron. As long as the surface of the griddle is non-stick, this trick can be used. Actually, the advantage of non-stick plates is that they precisely have the property of not allowing anything sticks too much, making it easy to remove stains and residue simply by carefully washing the surface.

The important thing here is not to damage that non-stick coating. To increase the effectiveness of this trick you have to heat a little water and dip a cloth. Then add a few drops of laundry detergent to later rub against the non-stick surface. This should be enough to clean the iron without damaging the base. A swab can be used for crevices, this way small holes can be reached.